Wholesale Plastic Creasing Matrix for Auto-Creasing Machine

Basic Info

Model NO.	0.3*0.8-1.0*6.0
Back Type	13mm Standard or 9mm Narrow
Application	Box or Carton Counter Plate
Transport Package	Single Item Single Package Size: 40X40X30 Cm Sing
Specification	0.3*0.8-1.0*6.0
Trademark	BNT
Origin	Jinan
HS Code	39169090
Production Capacity	200 Box/Boxes Per Week

Product Description

Die Making Creasing Matrixs for Die cutting and creasing machine

1. For die cutting . 2. Different size available. 3. Two different material :plastic and pressboard

Adhesive Creasing Matrix

Specifications:

Material: plastic,Pressboard.

Size:0.2*1.0mm,0.3*0.6mm,0.3*0.8mm,0.3*1.0mm,

0.3*1.1-1.7mm,0.4*0.6mm,0.4*0.8mm,

0.4*1.0-1.7mm,0.4*1.9mm,0.4*2.1mm,

0.5*0.6mm,0.5*0.8mm,0.5*1.0-1.7mm,and etc.

Advantages:

1)Fast and exact matrix

2)Self adhesive steel based

3)Channel from hard plastic

Accurate positon ability, good glue material to ensure sticky ability

Complete range of size to ensure all kind of demand

Plastic material and pressboard material both available

Ordinary type and Finger lift type (for easy peel off the back)

Back width: normal 13mm or narrow 9mm

Length: 700mm/pcs

Technique characteristics:

Brank quickly setting cteasing matrix, adopting advanced technology, and well making, is the rsult of years of technical innovation and practical application, enjoying a high reputation in the carton and box industry. Convenient handing and excellent quality make the creasing perfect..

A.Thickess of creasing matrix.B.Brute mighty bottom filmC.Channel width of creasing matrix.D.Locating plastic strip.E.Protection film.

1.The amount needed to get the length of the indentation modulus	2.Indentation die cutting machine used incision, the indentation die cut into both ends of the natural 90-degree corner
3.Indentation with plastic mold on the position will be cut indentation in the card-mode version of the cutting line indentation	4.To protect Indentation model glue off the bottom
5.Die-cutting machine to transfer the pressure well, and then die-board installed, and then switch on a cutting machine, that is, positioning mode indentation in the mold plate on the end of	6.Indentation modulus tear on the positioning of plastic article

Paper weight (g)	Thickness of the paper	Indentation line height (mm)						Indentation made common line
		23.50	23.40	23.20	23.20	23.10	23.00	23.24	22.9
200	0.28mm	0.3×1.0	0.4×1.0					0.5×1.0
250	0.35mm	0.3×1.2	0.4×1.2	0.5×1.2				0.5×1.2
300	0.42mm	0.3×1.3	0.4×1.3	0.5×1.4				0.5×1.4
350	0.50mm		0.4×1.4	0.5×1.5	0.6×1.5			0.5×1.5
400	0.56mm			0.5×1.6	0.6×1.6			0.5×1.6	0.8×1.6
450	0.63mm			0.5×1.7	0.6×1.7	0.7×1.7			0.8×1.7
500	0.70mm					0.7×1.7	0.8×1.7		0.8×1.7
Note: Specifications recommended only choice, as the first choice Specifications

Corrugated selected in the control (by beer-cutting knife to do a high standard 23.8mm)

corrugated paper	after flattened corrugated thickness	the height of the creasing line	the choosable creasing mould(1.05 thickness creasing line)	the choosable creasing mould(1.42 thickness creasing line)
E-Flute	0.65mm	23.10mm	0.7*2.3	----
E-Flute	0.75mm	23.00mm	0.8*2.5	----
B-Flute	0.85mm	22.90mm	0.8*2.7	0.8*3.2
C-Flute	0.95mm	22.80mm	1.0*3.0	1.0*3.5
C-Flute	1.05mm	22.70mm	1.0*3.2	1.0*3.5
	1.15mm	22.60mm	----	1.0*4.0